Why are Scooters hard to start when it's 30 degrees outside?

Why are Scooters hard to start when it's 30 degrees outside?

Why are Scooters hard to start when it's very cold outside?

When the temperature drops to 30 degrees Fahrenheit, scooter owners often face the frustrating challenge of starting their vehicles. This issue arises due to several reasons related to the scooter's mechanics and the effects of cold weather.

1. Cold Engine Start-up

In colder temperatures, the engine of a scooter becomes harder to start. This is primarily because the oil inside the engine thickens, causing increased resistance to movement. The thicker oil requires more energy to circulate and lubricate the engine components, making it difficult for the scooter to ignite.


  • Consider using a lower viscosity oil during colder months. Thinner oil flows more easily in cold temperatures, reducing the strain on the engine during start-up.
  • Use an engine block heater or a heated blanket to warm up the engine before starting it. This helps to decrease the viscosity of the oil, making it easier for the scooter to start.
  • Ensure the battery is fully charged as a weak battery can further hinder the starting process. Cold weather puts additional strain on the battery, so proper maintenance is crucial.
  • Turn the ignition key on and off a few times before attempting to start the scooter. This action helps to circulate the oil and warm up the engine slightly.
  • Consider using a fuel additive that reduces the risk of fuel gelling, which can occur in extremely cold temperatures.

2. Carburetor Issues

Scooters rely on carburetors to mix air and fuel for combustion. When the temperature drops, the fuel in the carburetor can become denser, affecting the scooter's ability to start. Additionally, the cold air reduces the vaporization of fuel, leading to an inadequate fuel-air mixture.


  • Consider using a fuel stabilizer or additives specifically designed for cold weather. These products can help prevent fuel from becoming too dense and improve the fuel-air mixture.
  • Ensure the carburetor is clean and free from any clogs or debris. Regular maintenance and cleaning can prevent starting issues caused by carburetor blockages.
  • Warm up the scooter before attempting to start it. You can do this by turning on the ignition for a few minutes without starting the engine. This allows the carburetor to warm up, making it easier for the fuel to vaporize.
  • Consider installing an electric carburetor heater. This device warms up the carburetor, ensuring a better fuel-air mixture during cold weather.
  • Adjust the idle speed and air-fuel mixture according to the manufacturer's specifications for colder temperatures.

3. Battery Performance

Low temperatures can significantly impact the performance of the scooter's battery. Cold weather reduces the battery's ability to deliver power effectively, making it harder to start the scooter.


  • Keep the battery charged and maintained regularly. A fully charged battery performs better in cold weather.
  • If possible, store the scooter in a warm environment or use a battery warmer to maintain optimal battery performance.
  • Consider purchasing a higher capacity battery to ensure better performance in cold weather conditions.
  • Turn off any unnecessary electrical components, such as lights or the radio, before attempting to start the scooter. This reduces the load on the battery, increasing the chances of a successful start.
  • Inspect the battery cables and connections for any signs of corrosion or damage. Clean or replace them if necessary.

4. Spark Plug Problems

A faulty or worn-out spark plug can also contribute to starting difficulties in cold weather. The spark plug may struggle to generate a strong spark, hindering the ignition process.


  • Regularly inspect and clean the spark plug. Replace it if necessary, as a worn-out spark plug may not function properly in colder temperatures.
  • Ensure the spark plug gap is set correctly according to the manufacturer's specifications. A smaller gap can help generate a stronger spark, aiding in the starting process.
  • Consider using a spark plug with a higher heat range. This allows the spark plug to maintain a higher temperature, making it easier to ignite the fuel-air mixture in cold weather.
  • Check the ignition system for any signs of damage or malfunction. Faulty ignition components can affect the spark plug's performance.

5. Air Filter Maintenance

A clogged or dirty air filter can restrict the airflow to the engine, making it harder to start the scooter in cold weather.


  • Regularly clean or replace the air filter according to the manufacturer's recommendations.
  • Inspect the air intake system for any signs of blockage or damage. Clear any debris or obstructions that may hinder the airflow.

By understanding these potential issues and implementing the suggested solutions, scooter owners can improve their chances of starting their vehicles successfully, even in chilly weather conditions. Remember to consult your scooter's manual or seek professional Scooter assistance if you encounter persistent starting problems.

Back to blog