How to Replace the Starter on a Gas Powered Motor Scooter

How to Replace the Starter on a Gas Powered Motor Scooter

Just like an automobile scooters need maintenance and repairs sometimes

A gas powered motor scooter can be a convenient and fun mode of transportation. However, like any mechanical device, it may encounter issues over time. One common problem is a faulty starter. If your scooter's starter is not working properly, it can prevent the engine from starting. In this guide, we will walk you through the steps to replace the starter on a gas powered motor scooter.

Step 1: Gather the Necessary Tools

Before you begin, make sure you have the following tools:

  • Socket wrench set
  • Screwdriver set
  • Replacement starter
  • Shop rag or towel
  • Safety goggles
  • Gloves

Step 2: Prepare the Scooter

Start by turning off the scooter's engine and removing the key from the ignition. Disconnect the battery to ensure your safety during the replacement process.

Step 3: Locate the Starter

The Scooter starter is typically located near the engine, often on the side or underneath. Refer to your scooter's manual for specific instructions on locating the starter.

Step 4: Remove the Old Starter

Using the appropriate socket wrench, carefully remove the bolts that secure the starter in place. Take note of the bolt sizes and their locations to make reassembly easier later. Once the bolts are removed, gently pull the starter away from the engine.

Step 5: Install the New Starter

Position the new starter in place and align it with the bolt holes. Insert the bolts and tighten them using the socket wrench, ensuring they are secure but not overly tight.

Step 6: Reconnect the Battery

Now that the new starter is installed, it's time to reconnect the battery. Make sure the connections are secure and tight.

Step 7: Test the Starter

Reinsert the key into the ignition and turn it to the 'on' position. Attempt to start the scooter. If the starter engages and the engine starts smoothly, you have successfully replaced the starter.

Step 8: Troubleshooting Tips

If your engine still doesn't start after replacing the starter, here are a few troubleshooting tips:

  1. Check the battery: Ensure that the battery is fully charged and in good condition. Weak or faulty batteries can affect the starter's performance.
  2. Inspect the wiring: Examine the wiring connections to ensure they are secure and free from corrosion. Loose or damaged wiring can prevent the starter from functioning properly.
  3. Test the solenoid: The solenoid is responsible for transmitting electrical current to the starter. Use a multimeter to check if the solenoid is receiving and transmitting the appropriate voltage.
  4. Check the spark plug: A faulty spark plug can also prevent the engine from starting. Inspect the spark plug for signs of damage or wear and replace if necessary.
  5. Consult a professional: If you have followed all the steps and troubleshooting tips, but the issue persists, it may be best to seek the assistance of a professional mechanic who has experience with gas powered motor scooters.

Step 9: Maintenance Tips

To keep your scooter's starter and engine in good condition, it's important to perform regular maintenance. Here are a few maintenance tips:

  • Change the oil regularly: Follow the manufacturer's recommendations for oil change intervals. Clean oil helps lubricate the engine and reduce wear on the starter.
  • Inspect the air filter: A clogged air filter can restrict airflow to the engine, affecting its performance. Clean or replace the air filter as needed.
  • Keep the battery charged: If your scooter has a battery-powered starter, make sure to keep the battery charged to avoid starting issues.
  • Inspect the starter motor: Periodically check the starter motor for any signs of damage or wear. Replace if necessary.
  • Keep the scooter clean: Regularly clean the scooter to prevent the buildup of dirt and debris, which can affect the starter's performance.


By following these steps, you can replace the starter on your gas powered motor scooter and get it back on the road in no time. Remember to exercise caution and refer to your scooter's manual for any specific instructions or troubleshooting tips. Maintaining your scooter regularly and addressing any issues promptly can help ensure its longevity and optimal performance. If you are unsure or uncomfortable with any step of the process, it is always best to consult a professional mechanic.

Back to blog