AMERICA'S MOST AFFORDABLE POWERSPORTS & ALL TERRAIN VEHICLE DEALER SINCE 2004

How to Adjust Valves on a 50cc & 150cc 4-Stroke Motor Scooter

Scooter valves need to be adjusted from warm to cold seasons 

Regular maintenance is essential for keeping your 50cc or 150cc 4-stroke motor scooter running smoothly. One crucial aspect of maintenance is adjusting the valves. The valve clearance directly affects the scooter's performance and longevity. In this article, we will guide you through the process of adjusting the valves on your 50cc or 150cc GY6 scooter.

Step 1: Gather the Necessary Tools

Before you begin, ensure you have the following tools:

  • Feeler gauge
  • Socket wrench
  • Screwdriver

Step 2: Locate the Valves

The valves are usually located on the side of the engine head. Refer to your scooter's manual for the exact location.

Step 3: Determine Valve Clearance Specifications

Valve clearance refers to the small gap between the valve stem and the rocker arm when the valve is fully closed.

For a 150cc GY6 scooter, the intake valve clearance should be set between 0.003" and 0.004", while the exhaust valve clearance should be set between 0.004" and 0.006".

For a 50cc GY6 scooter, the intake valve clearance should be set between 0.003" and 0.004", and the exhaust valve clearance should be set between 0.004" and 0.005".

Step 4: Prepare for Valve Adjustment

Before adjusting the valves, it's important to ensure the engine is cool. Start by removing any necessary components that may be obstructing access to the valves. This may include the valve cover or other engine parts.

Step 5: Adjust the Valves

Now that you're ready to adjust the valves, follow these steps:

  1. Using a socket wrench, loosen the lock nut on the valve you wish to adjust.
  2. Insert the appropriate feeler gauge between the valve stem and the rocker arm.
  3. Tighten the lock nut while holding the feeler gauge in place.
  4. Remove the feeler gauge and check the clearance.
  5. If the clearance is within the specified range, move on to the next valve. If not, repeat the process until the clearance is correct.

Step 6: Repeat for All Valves

Repeat the process for each valve, ensuring that the clearance for each valve is within the specified range. Take your time and be meticulous in your adjustments to achieve optimal performance.

Step 7: Reassemble and Test

Once you have adjusted all the valves, reassemble any components you removed during the process. Double-check that all fasteners are tightened securely. Start the engine and listen for any unusual noises. If everything sounds normal, congratulations! You have successfully adjusted the valves on your 50cc or 150cc 4-stroke motor scooter.

Tips and Precautions

Here are some additional tips and precautions to keep in mind:

  • Always consult your scooter's manual for specific instructions and specifications.
  • Perform valve adjustments in a clean and well-lit area to avoid misplacing any small parts.
  • Be gentle when adjusting the valves to avoid damaging any components.
  • Regularly check and adjust the valves according to the recommended maintenance schedule for your scooter.
  • Pay attention to any symptoms of valve clearance issues, such as loss of power or unusual engine noise.
  • If you're unsure about any step, seek assistance from a qualified mechanic.

Conclusion

Regularly adjusting the valves on your 50cc or 150cc GY6 motor scooter is crucial for optimal performance and longevity. By following these steps and ensuring the valve clearance falls within the recommended specifications, you can keep your scooter running smoothly for miles to come. Remember to take your time, be meticulous, and consult your scooter's manual for any specific instructions. Happy riding!


Leave a comment

Please note, comments must be approved before they are published