How to Change the Oil on a Moped or Scooter

How to Change the Oil on a Moped or Scooter


If you own a moped or scooter, it's essential to perform regular maintenance to keep it running smoothly. One crucial aspect of maintenance is changing the oil. Regular oil changes help to prolong the life of your engine, improve its performance, and ensure a smooth ride. In this article, we will guide you through the step-by-step process of changing the oil on your moped or scooter.

Step 1: Gather the Necessary Materials

Before you begin, make sure you have the following items:

  • Engine oil suitable for your moped or scooter (refer to the manufacturer's recommendations)
  • An oil filter (if applicable)
  • An oil drain pan
  • A wrench or socket set
  • A funnel
  • A clean rag or paper towels

Step 2: Prepare Your Moped or Scooter

Start by ensuring that your moped or scooter is on a level surface. If the engine is hot, allow it to cool down before proceeding. It's also a good idea to consult your owner's manual for any specific instructions related to your model.

Step 3: Locate the Oil Drain Plug

The oil drain plug is typically located on the bottom of the engine. Look for a bolt-like object that can be easily accessed with a wrench or socket set. Once located, place the oil drain pan beneath it to catch the old oil.

Step 4: Drain the Old Oil

Carefully loosen and remove the oil drain plug using the appropriate tool. Allow the old oil to drain completely into the oil drain pan. Be cautious as the oil may be hot and could cause burns.

Step 5: Replace the Oil Filter (if applicable)

If your moped or scooter has an oil filter, now is the time to replace it. Follow the manufacturer's instructions on how to remove and replace the oil filter. Make sure to apply a thin layer of new oil to the rubber gasket of the new oil filter before installing it.

Step 6: Install the Drain Plug

Once the old oil has finished draining, clean the drain plug and inspect the washer for any damage. If necessary, replace the washer with a new one. Then, carefully reinsert the drain plug and tighten it to the manufacturer's specifications.

Step 7: Add Fresh Oil

Using a funnel, pour the recommended amount and type of engine oil into the oil filler hole. Refer to your owner's manual for the correct oil capacity and type, whether it's a four-stroke or two-stroke engine. Take care not to overfill, as it can lead to performance issues.

Step 8: Check the Oil Level

After adding the new oil, let it settle for a few minutes. Then, remove the dipstick, wipe it clean, and reinsert it. Remove it again and check the oil level. It should be within the recommended range marked on the dipstick. If necessary, add or remove oil accordingly.

Step 9: Clean Up and Dispose of the Old Oil

Dispose of the old oil properly by taking it to a recycling center or an auto parts store that accepts used oil. Wipe away any spills or drips with a clean rag or paper towels.

Step 10: Additional Considerations for Two-Stroke Engines

If your moped or scooter has a two-stroke engine, there are a few extra steps to keep in mind:

  • Check the fuel and oil mixture: Two-stroke engines require a specific fuel and oil mixture. Make sure to follow the manufacturer's recommendations and mix the fuel and oil in the correct ratio.
  • Inspect the gear oil: Two-stroke engines often have a separate compartment for gear oil. Check the gear oil level and top it up if necessary.


Changing the oil on your scooter is a simple yet essential maintenance task. By following the step-by-step instructions outlined in this article, you can ensure the longevity and optimal performance of your engine. Remember to consult your owner's manual for any specific instructions related to your model and always use the recommended type of oil. With regular oil changes, your moped or scooter will continue to provide you with a smooth and enjoyable ride for years to come.

Back to blog