How to Change the Drive Belt on a Motor Scooter

How to Change the Drive Belt on a Motor Scooter

Change the drive belt on a 50cc & 150cc Scooter like a pro

Motor scooters are a popular mode of transportation due to their fuel efficiency and ease of use. However, like any vehicle, they require regular maintenance to ensure optimal performance. One crucial maintenance task is changing the drive belt, which is responsible for transferring power from the engine to the rear wheel. In this comprehensive guide, we will provide you with detailed instructions on how to change the drive belt on a motor scooter.

Step 1: Gather the necessary tools and materials

Before you begin, make sure you have the following tools and materials:

  • Socket set
  • Wrench
  • New drive belt
  • Owner's manual

Step 2: Locate the drive belt

Refer to your scooter's owner's manual to find the exact location of the drive belt. Typically, it is found in the engine compartment, connected to the engine and rear wheel. Familiarize yourself with the layout and components surrounding the drive belt to ensure a smooth and efficient replacement process.

Step 3: Remove the old drive belt

Using a socket set or a wrench, loosen the bolts or screws that hold the drive belt cover in place. Once the cover is removed, you will have access to the drive belt. Carefully release the tension on the belt by either adjusting the tensioner or removing the tensioning spring. This will allow you to slip off the old drive belt from the pulleys. Take note of the routing of the belt for easy installation of the new one.

Step 4: Inspect the drive belt

Take a close look at the old drive belt to assess its condition. Look for signs of wear, cracks, or fraying. If the belt shows any signs of damage, it is essential to replace it with a new one. Even if the belt appears fine, it is still recommended to replace it as a preventive measure, especially if it has been in use for a long time.

Step 5: Install the new drive belt

Take the new drive belt and slide it onto the pulleys, making sure it is properly aligned. Slowly release the tension on the belt and ensure it is seated correctly on the pulleys. It is crucial to follow the specific instructions provided in your scooter's owner's manual to ensure proper installation. Improperly installed drive belts can lead to poor performance or even accidents.

Step 6: Adjust the tension

After installing the new drive belt, it is important to adjust the tension properly. Refer to your scooter's owner's manual for the recommended tension specifications. Using the appropriate tools, adjust the tension to the specified level. Incorrect tension can cause the belt to slip or wear out prematurely, affecting the scooter's performance and overall safety.

Step 7: Reassemble and test

Replace the drive belt cover and tighten the bolts or screws securely. Double-check that everything is properly aligned and tightened. Start your motor scooter and take it for a short test ride to ensure the drive belt is functioning correctly. Pay attention to any unusual noises or vibrations during the test ride. If you notice any issues, stop the scooter and inspect the drive belt again.

Tips and Precautions

  • Always consult your scooter's owner's manual for specific instructions and guidelines regarding drive belt replacement.
  • Wear protective gloves and eyewear when working on your scooter to prevent injury.
  • If you are unsure or uncomfortable with performing this maintenance task, it is always recommended to consult a professional mechanic.
  • Regularly inspecting and replacing the drive belt will help maintain the performance and longevity of your scooter.
  • Consider keeping a spare drive belt with you while on long rides, as it can come in handy in case of an emergency.
  • Keep the drive belt clean and free from debris to ensure optimal performance.
  • Pay attention to any signs of belt wear or abnormal noises during regular operation. Addressing these issues promptly can prevent further damage.


Changing the drive belt on a motor scooter is a relatively simple task that can be done by following these step-by-step instructions. By replacing the drive belt as part of your regular maintenance routine, you ensure that your motor scooter operates at its best. Remember to take the necessary precautions, consult your owner's manual, and seek a professional scooter repair shop if needed. With proper care and maintenance, your motor scooter will continue to provide you with efficient and reliable transportation for years to come.

Back to blog