How to Winterize any Machine

How to Winterize any Machine

Basic Steps to Winterize Any Gas Powered Machine for Storage

Winter is approaching, and it's time to prepare your gas-powered machines for storage. Whether you have a lawnmower, snowblower, or any other gas-powered equipment, proper winterization is essential to prevent damage and ensure a smooth start next season. Follow these basic steps to winterize your gas-powered machine:

1. Drain the Fuel

The first step is to drain the fuel from the machine's tank and carburetor. Stale fuel can clog the carburetor and cause starting issues. Run the machine until it runs out of fuel or use a siphon to remove the fuel manually. Make sure to follow proper safety precautions and dispose of the fuel in accordance with local regulations.

2. Change the Oil

Next, change the oil in your gas-powered machine. Used oil contains contaminants that can cause corrosion during storage. Refer to the owner's manual for the appropriate oil type and drain the old oil. Replace it with fresh oil to protect the engine components.

3. Remove the Battery

If your gas-powered machine has a battery, remove it before storing. Cold temperatures can damage the battery and reduce its lifespan. Store the battery in a cool, dry place and keep it charged periodically during the winter to maintain its performance.

4. Clean and Lubricate

Thoroughly clean the machine, removing any dirt, grass, or debris. Use a brush or compressed air to clean hard-to-reach areas. Lubricate moving parts such as cables, hinges, and pulleys to prevent rust and ensure smooth operation when you start the machine next season.

5. Store in a Dry Location

Find a dry and sheltered location to store your gas-powered machine during the winter months. Moisture can cause rust and other damage. Consider using a weatherproof cover to provide additional protection.

6. Prevent Critter Infestation

Before storing your machine, inspect it for any openings or gaps where small animals could enter and build nests. Seal these gaps using appropriate materials, such as wire mesh or foam insulation, to prevent critter infestation during storage.

7. Perform Maintenance Checks

Periodically check your stored gas-powered machine throughout the winter. Look for signs of damage or corrosion. Check the tires for proper inflation and rotate them occasionally to prevent flat spots. This regular maintenance will help ensure that your machine is in good condition when you're ready to use it again.

By following these basic steps, you can winterize any gas-powered machine effectively. Proper winterization will protect your equipment from damage and extend its lifespan, saving you time and money in the long run. Remember to consult the owner's manual for any specific instructions related to your machine.

Back to blog