Starting a Scooter or Moped that has been sitting

Starting a Scooter or Moped that has been sitting

Starting a Scooter or Moped that has been sitting

When it comes to starting a scooter or moped that has been sitting for a while, there are a few important steps to follow. Whether you've stored your scooter during the winter months or haven't used it in a long time, these tips will help you get your scooter up and running again.

1. Inspect the Fuel System

The first thing you should do is inspect the fuel system. Check the fuel tank for any signs of corrosion or contamination. If you notice any, it's best to drain the old fuel and clean the tank before attempting to start the scooter. Additionally, check the fuel lines, filters, and carburetor for any clogs or damages. Clean or replace parts if necessary.

2. Check the Battery

A dead or weak battery can make starting your scooter a challenge. Check the battery's voltage using a multimeter. If the voltage is low, it may need to be charged or replaced. Ensure the battery terminals are clean and securely connected. If your scooter has a kick-start option, you can try kick-starting it if the battery is completely dead.

3. Evaluate the Engine Oil

Next, check the engine oil level and condition. If the oil appears dirty or low, change it using the recommended oil for your scooter. Clean oil is crucial for the smooth operation of the engine. Refer to your scooter's manual for the correct oil type and change interval.

4. Test the Spark Plug

The spark plug plays a vital role in starting the scooter's engine. Remove the spark plug and inspect it for signs of wear or fouling. If necessary, clean or replace the spark plug. Ensure that the spark plug gap is set according to the manufacturer's specifications.

5. Prime the Carburetor

If your scooter has a carburetor, it may need to be primed before starting. This involves spraying a small amount of starting fluid or carburetor cleaner into the carburetor. Be cautious not to use excessive amounts, as it can damage the engine. Priming the carburetor helps to ignite the fuel mixture and aids in starting the scooter.

6. Check the Air Filter

Inspect the air filter for any dirt or debris. A clogged air filter can hinder the scooter's performance and make it difficult to start. Clean or replace the air filter if necessary. A clean air filter ensures proper airflow to the engine, improving combustion and starting capabilities.

7. Clean the Carburetor

If you've determined that the carburetor is clogged or not functioning correctly, it may need to be cleaned. Remove the carburetor and disassemble it carefully. Soak the components in carburetor cleaner to remove any built-up deposits or residue. Use a soft brush or toothbrush to clean hard-to-reach areas. Once cleaned, reassemble the carburetor and reinstall it on the scooter.

8. Check the Tires and Brakes

Inspect the tires for any signs of wear or damage. Check the tire pressure and inflate them to the recommended level if needed. Additionally, test the brakes to ensure they are functioning properly. The last thing you want is to have an issue with your brakes when you're out riding your scooter.

9. Lubricate Moving Parts

After a period of inactivity, it's a good idea to lubricate any moving parts that may have become stiff. Apply lubricant to the throttle cable, brake cables, and any other pivot points or joints. This will help ensure smooth operation and prevent unnecessary strain on the scooter's components.

10. Check the Electrical System

Inspect the electrical system for any loose connections or damaged wires. Check the fuses and replace any blown fuses. Ensure that all lights, indicators, and switches are working properly. Address any electrical issues before attempting to start the scooter.

11. Start the Scooter

Now that you have completed the necessary checks and preparations, it's time to start the scooter. Turn the ignition key or switch to the on position. If your scooter has a kick-start, use a firm and swift kick to crank the engine. If it's an electric start, press the start button. Give the scooter a few tries, allowing the engine to rest in between attempts if it doesn't start right away.

12. Allow the Engine to Warm Up

Once the scooter starts, let the engine idle for a few minutes to warm up. This allows the oil to circulate properly and ensures the engine reaches optimal operating temperature. Avoid revving the engine excessively during this warm-up period.

13. Take a Test Ride

After the engine has warmed up, take your scooter for a short test ride. Pay attention to any unusual noises or vibrations. Test the brakes, lights, and other essential components to ensure everything is functioning correctly. If you notice any issues, address them promptly to prevent further damage.


Starting a scooter or moped that has been sitting requires a systematic approach. By following the steps outlined above, you can increase your chances of successfully starting your scooter and getting back on the road. Remember to perform regular maintenance and keep your scooter in good condition to avoid similar issues in the future.

Additional Tips:

  • Store your scooter in a cool, dry place to prevent moisture buildup.
  • Consider using a fuel stabilizer if you plan to store your scooter for an extended period.
  • Perform regular maintenance, including oil changes, spark plug replacements, and air filter cleanings, to keep your scooter in optimal condition.
  • Consult your scooter's manual for specific maintenance instructions and recommended service intervals.
  • If you're unsure about any maintenance or repair tasks, it's best to consult a professional scooter mechanic.
  • Keep a record of your scooter's maintenance and service history for future reference.
  • Regularly check the tire pressure and tread depth to ensure safe and efficient riding.
  • Consider wearing protective gear, such as a helmet, gloves, and a jacket, when riding your scooter for added safety.
  • Follow all traffic laws and regulations when operating your scooter on public roads.
  • Join a scooter enthusiasts' community or forum to connect with other scooter owners and share experiences and tips.
Back to blog