Basic Routine Maintenance Schedule for 4 stroke ATVs & 4 Wheelers

Basic Routine Maintenance Schedule for 4 stroke ATVs & 4 Wheelers

Preventative maintenance should be preformed at least 2 times per year to avoid costly repairs

Owning a 4 stroke ATV or four wheeler can provide countless hours of thrilling adventures and outdoor fun. However, to keep your vehicle running smoothly and ensure its longevity, regular maintenance is essential. Following a basic routine maintenance schedule will not only optimize your ATV's performance but also prevent costly repairs down the road. In this article, we will guide you through a comprehensive maintenance routine for your 4 stroke ATV or four wheeler.

1. Oil Change

Regular oil changes are crucial to keep the engine running smoothly. The oil lubricates the internal components, reduces friction, and prevents overheating. Refer to the manufacturer's guidelines to determine the recommended oil change interval for your specific ATV or four wheeler. Typically, oil changes should be done every 50 hours of operation or at least once a year. Make sure to use the recommended oil type and change both the oil and oil filter for optimal results.

2. Air Filter Cleaning/Replacement

The air filter prevents dirt, dust, and debris from entering the engine. Over time, the filter can become clogged, restricting airflow and affecting performance. It is important to regularly check and clean the air filter. Follow the manufacturer's instructions to remove the filter, clean it with compressed air or a mild detergent, and ensure it is completely dry before reinstalling. If the filter is damaged or excessively dirty, it should be replaced. A clean air filter allows for better fuel combustion and improves engine performance.

3. Spark Plug Inspection

The spark plug is responsible for igniting the fuel in the engine's combustion chamber. Regularly inspect the spark plug for signs of wear, corrosion, or damage. If the electrode is worn or the insulator is cracked, it's time to replace the spark plug. A well-maintained spark plug ensures proper combustion, which contributes to better fuel efficiency and engine performance. Remember to use the recommended spark plug type and follow the proper gap specifications during installation.

4. Battery Maintenance

The battery provides the electrical power to start your ATV and operate its accessories. Regularly check the battery for any signs of corrosion or damage. Clean the battery terminals with a wire brush and a solution of baking soda and water to remove any buildup. Ensure a secure connection between the terminals and the cables. If the battery is weak or not holding a charge, consider replacing it to avoid any inconvenience during your rides. Additionally, make sure to keep the battery charged during periods of inactivity to prevent it from losing its charge.

5. Tire Inspection

The tires are the only contact point between your ATV and the ground, making them crucial for traction, stability, and overall safety. Regularly inspect the tires for signs of wear, cracks, or punctures. Check the tire pressure regularly and adjust it to the recommended level specified by the manufacturer. Uneven tire pressure can affect handling and performance. Replace any worn-out or damaged tires promptly to ensure optimal traction and control. Additionally, rotate the tires periodically to promote even wear and extend their lifespan.

6. Fluid Levels

Regularly check and top up the fluid levels in your ATV. This includes coolant, brake fluid, and transmission fluid. Refer to the owner's manual for specific instructions on how to check and add fluids. Maintaining the proper fluid levels helps prevent overheating, ensures smooth gear shifting, and allows for optimal braking performance. Neglecting fluid levels can lead to costly repairs or even accidents. Remember to use the recommended fluid types and change them at the recommended intervals.

7. Brake System

The brake system is a critical safety component of your ATV. Regularly inspect the brake pads, rotors, and brake lines for any signs of wear, damage, or leaks. Ensure that the brake system is functioning properly and adjust the brake pads if necessary. It is recommended to bleed the brake system at least once a year to remove any air bubbles and maintain optimal braking performance. If you notice any abnormal sounds, vibrations, or reduced braking power, have your brake system checked by a professional mechanic.

8. Suspension and Steering

The suspension and steering components play a vital role in the overall comfort and control of your ATV. Regularly check for any signs of looseness, excessive play, or leakage in the suspension and steering system. Lubricate the suspension components as recommended by the manufacturer to ensure smooth operation and prevent premature wear. Additionally, check the steering for proper alignment and responsiveness. If you notice any issues, have a qualified technician inspect and adjust the suspension and steering components.

9. Drive Chain and Sprockets

If your ATV is chain-driven, regularly inspect and maintain the drive chain and sprockets. Ensure that the chain is properly tensioned, lubricated, and free from excessive wear. Clean the chain regularly with a chain brush and apply a suitable chain lubricant to minimize friction and maximize its lifespan. Inspect the sprockets for any signs of wear and replace them if necessary. A well-maintained drive chain and sprockets contribute to better power transmission and overall performance.

10. Electrical System

Check the electrical system of your ATV regularly to ensure all lights, indicators, and switches are functioning properly. Replace any faulty bulbs or fuses promptly to maintain visibility and comply with road regulations if you ride on public trails. Additionally, inspect the wiring for any signs of damage or exposed wires. If you encounter any electrical issues that you are unable to fix, consult a qualified technician.

11. Frame and Body Inspection

Periodically inspect the frame and body of your ATV for any signs of cracks, dents, or damage. Check the welds for any signs of weakness or stress. Repair or reinforce any damaged areas to maintain the structural integrity of your ATV. Additionally, wash and wax the body regularly to protect it from corrosion and maintain its appearance.

12. Regular Cleaning

Keeping your ATV clean not only enhances its visual appeal but also prolongs its lifespan. Regularly wash your ATV using a mild detergent and water. Pay special attention to areas prone to dirt and debris buildup, such as the undercarriage and engine. After washing, thoroughly dry your ATV to prevent any water-related issues. Additionally, apply a suitable protectant to plastic and rubber parts to prevent fading and cracking.


A basic routine maintenance schedule is vital to keep your 4 stroke All Terrain Vehicle in top condition. By following these maintenance tasks regularly, including oil changes, air filter cleaning/replacement, spark plug inspection, battery maintenance, tire inspections, fluid level checks, brake system inspections, suspension and steering checks, drive chain and sprocket maintenance, electrical system checks, frame and body inspection, and regular cleaning, you can enjoy reliable performance, extend the lifespan of your ATV, and ensure your safety during every ride. Make sure to consult your ATV's owner's manual for specific maintenance guidelines and intervals, as they may vary depending on the make and model of your vehicle.

Back to blog